GAFAS
WEB-3D
1017 kB
Original (photo)
Original (photo)
What the 3D model was built from
Dakar DA 10015/612 · Model spec v2 · Image model: fal-ai/nano-banana-pro/edit (read off the elevation this build traced) · 1017 kB · Built 17. 8. 2026 04:28 CEST
This model is not a photo and not a scan — it is computed from the material below. The images are the real intermediate steps of the build (elevations, cut-outs, photo projections, textures), the numbers are measured dimensions, and every group carries a note on how they were obtained.
Everything below belongs to the model currently on screen — nothing from another build.
Source images — elevace 16×
Source images — projekce 2×
Source images — mezivýstup 2×
Source images — porovnání 1×
Source images — ostatní 6×
AI prompts — the wording that produced this 12×
The exact text the image model was given while this was built. Shown and copied character for character, rejected attempts included — a retry is worded differently, and that difference is the point. A row without the “reconstructed” badge is a transcript of the request that was actually sent.
The spec also holds 18 request(s) from other builds of this frame (the bake-off of other image models). They are not this model’s provenance, so they are not shown.
-
Elevace SHORA: půdorys — z něj se staví 3D tvar stranic (ohyb, tloušťka, kloub)Attached: ref-square-planWhole.jpg
elevations.planWhole.raw points at this record's own raw file (elev-planWhole--nano-banana-2-18.png) — the join is on the artefact, not on a model name
- Plocha v rastru
- 13 %
- Průchozích otvorů
- 0
- Souvislých kusů
- 1
- Prolamovaná
- ne
- Odstraněných smítek
- 0
- Pokusů
- 1
- Prošlo kontrolou
- ano
- Počet vrcholů obrysu
- 368× bod
API response
{ "images": [ { "url": "https://v3b.fal.media/files/b/0aa626df/UToL-zELkNdwqfrf8GDpm_i8q5zHVy.png", "content_type": "image/png", "file_name": "UToL-zELkNdwqfrf8GDpm_i8q5zHVy.png", "file_size": null, "width": null, "height": null } ], "description": "" } -
Elevace ZEZADU: nosník s polštářkyAttached: DA10015612__2.jpg
{"endpoint": "https://fal.run/fal-ai/nano-banana-2/edit", "code": 422, "detail": "{\"detail\":[{\"loc\":[\"body\"],\"msg\":\"The model did not generate the expected output for this prompt. This may occur for several reasons, including unsafe content, a prompt that is incompatible with the selected m
elevations.nosePad.raw points at this record's own raw file (elev-nosePad--nano-banana-2-13.png) — the join is on the artefact, not on a model name
- Plocha v rastru
- 80 %
- Průchozích otvorů
- 4
- Souvislých kusů
- 1
- Prolamovaná
- ano
- Odstraněných smítek
- 0
- Pokusů
- 1
- Prošlo kontrolou
- ano
- Počet vrcholů obrysu
- 434× bod
API response
{ "detail": [ { "loc": [ "body" ], "msg": "The model did not generate the expected output for this prompt. This may occur for several reasons, including unsafe content, a prompt that is incompatible with the selected media type (e.g., prompting an image model to generate audio), references to missing attachments, or other cases where the input cannot be processed as the requested output type. Please review your inputs and try again. If the issue persists, contact support.", "type": "no_media_generated", "url": "https://docs.fal.ai/errors#no_media_generated", "input": { "prompt": "The attached photograph shows one pair of eyeglasses. Produce a PHOTOGRAPHIC ORTHOGRAPHIC ELEVATION of the nose area of the front only — the bridge together with the short stretch of rim on each side of it — seen from BEHIND, the side that rests on the wearer's nose. THIS FRAME HAS NO SEPARATE NOSE PADS: it is moulded in one piece, and the nose rests directly on the frame's own material, which is thickened into a shallow lobe on each side of the bridge. There are NO pads, NO clear or white silicone ovals, NO pad arms, NO wires, NO metal posts, NO screws and NO inserts of any kind anywhere in this image. Draw only the frame's own material, in the frame's own colour and finish, showing the true shape of the two lobes and how the bridge arches between them. Orthographic means the camera is exactly perpendicular to that face and infinitely far away: no perspective, no vanishing point, no foreshortening, so distances across the image are true to the part's real proportions. PHOTOGRAPHIC means it must look like a photograph of the real object taken straight on: the real material with its real surface — acetate, metal, its grain, its veining, its speckle, its matte or glossy finish — at photographic resolution and detail. It must NOT be a drawing, an illustration, a diagram, a logo, a clipart, a vector graphic, a flat colour fill, a cartoon or a technical line drawing. Do NOT draw an outline, a contour line, a stroke, a border, a keyline or a rim of any colour around the part or around any of its openings — the part's edge is simply where the material ends. Where the real part has two or more colours, each colour must appear ON THE AREA THAT IS REALLY THAT COLOUR, at its true size — a coloured inner rim must be shown as a coloured inner rim, coloured temple tips as coloured temple tips — and never as a thin coloured line drawn around the shape. The part must be shown EXACTLY as it really is in the photograph — its true outline, its true taper, its true colours and materials, every hole and gap through it left open, and any printed or engraved marking still on it at its real position and size. Do not redesign it, do not simplify it, do not straighten its curves and do not add anything that is not on the real part. This view shows a face of the frame that carries NO lettering at all. There must be NO brand name, NO model code, NO size numbers, NO printed or engraved characters, NO logo and NO monogram anywhere in this image — not on the part, not on the background, and above all not written across an opening. The frame's markings are printed on the flat side faces of its temple arms, which are not in this picture. Do NOT add a bar, a plate, a panel, a band or any other piece of material to write on: every opening must stay completely open from edge to edge. The background, and every hole through the part, must be filled with PURE MAGENTA (hex #FF00FF) and nothing else — no white, no grey, no gradient, no shadow, no reflection, no ruler, no dimension lines, no text and no labels anywhere in the image. The magenta must run right up to the edge of the part and meet its own colour directly: NO dark outline, NO shadow, NO glow and NO halo of any kind between them. Light the part flatly and evenly so its own colour is what shows.", "num_images": 1, "seed": null, "aspect_ratio": "auto", "output_format": "png", "safety_tolerance": "4", "sync_mode": false, "image_urls": [ "<inline image/jpeg elided: 26556 bytes of base64 — the artefact is on disk, see artifact.path>" ], "system_prompt": "", "resolution": "2K", "video_url": null, "audio_url": null, "pdf_url": null, "limit_generations": true, "enable_web_search": false, "thinking_level": null } } ] } -
Elevace ZLEVA: levá stranička, vnější plochaAttached: DA10015612__2.jpg
elevations.templeOuter.raw points at this record's own raw file (elev-templeOuter--nano-banana-2-46.png) — the join is on the artefact, not on a model name
- Plocha v rastru
- 54 %
- Průchozích otvorů
- 3
- Souvislých kusů
- 1
- Prolamovaná
- ano
- Odstraněných smítek
- 0
- Pokusů
- 3
- Prošlo kontrolou
- ano
- Počet vrcholů obrysu
- 201× bod
API response
{ "images": [ { "url": "https://v3b.fal.media/files/b/0aa6a3c1/vFflFpaql5SLC5-Muy73r_DHT6yWW9.png", "content_type": "image/png", "file_name": "vFflFpaql5SLC5-Muy73r_DHT6yWW9.png", "file_size": null, "width": null, "height": null } ], "description": "" } -
Elevace ZPRAVA: levá stranička, vnitřní plochaAttached: DA10015612__2.jpg · elev-templeOuter--nano-banana-2-42.png
elevations.templeInner.raw points at this record's own raw file (elev-templeInner--nano-banana-2-38.png) — the join is on the artefact, not on a model name
- Plocha v rastru
- 53 %
- Průchozích otvorů
- 5
- Souvislých kusů
- 1
- Prolamovaná
- ano
- Odstraněných smítek
- 0
- Pokusů
- 1
- Prošlo kontrolou
- ano
- Počet vrcholů obrysu
- 309× bod
API response
{ "images": [ { "url": "https://v3b.fal.media/files/b/0aa66832/k64w9yRVWjXIrZQSeFj1y_hQ6JMUBI.png", "content_type": "image/png", "file_name": "k64w9yRVWjXIrZQSeFj1y_hQ6JMUBI.png", "file_size": null, "width": null, "height": null } ], "description": "" } -
Elevace ZPŘEDU: front (přední rám bez skel)Attached: DA10015612__2.jpg
elevations.frontFace.raw points at this record's own raw file (elev-frontFace--nano-banana-2-18.png) — the join is on the artefact, not on a model name
- Plocha v rastru
- 20 %
- Průchozích otvorů
- 1
- Souvislých kusů
- 1
- Prolamovaná
- ne
- Odstraněných smítek
- 0
- Pokusů
- 1
- Prošlo kontrolou
- ano
- Počet vrcholů obrysu
- 428× bod
API response
{ "images": [ { "url": "https://v3b.fal.media/files/b/0aa66824/zWtdoZZj0IDcvi7td-Fb2_FUEbU5cX.png", "content_type": "image/png", "file_name": "zWtdoZZj0IDcvi7td-Fb2_FUEbU5cX.png", "file_size": null, "width": null, "height": null } ], "description": "" } -
Kontrolní AI zdroj skel ZEZADU — nepoužívá se jako výsledný obrysAttached: DA10015612__2.jpg · frame-7347.candidate-frontFace-0-1786610891210730720.elev-frontFace-cut.png
{"endpoint": "https://fal.run/fal-ai/nano-banana-2/edit", "code": 403, "detail": "{\"detail\": \"User is locked. Reason: Exhausted balance. Top up your balance at fal.ai/dashboard/billing.\"}"}
elevations.lensBackFace.raw points at this record's own raw file (elev-lensBackFace--nano-banana-2-8.png) — the join is on the artefact, not on a model name
- Plocha v rastru
- 59 %
- Průchozích otvorů
- 0
- Souvislých kusů
- 1
- Prolamovaná
- ano
- Odstraněných smítek
- 0
- Pokusů
- 1
- Prošlo kontrolou
- ano
- Počet vrcholů obrysu
- 154× bod
API response
{ "images": [ { "url": "https://v3b.fal.media/files/b/0aa626f8/7H660o2NzeUbLv6Lf5eTr_ndBVnRaI.png", "content_type": "image/png", "file_name": "7H660o2NzeUbLv6Lf5eTr_ndBVnRaI.png", "file_size": null, "width": 3258, "height": 1280 } ], "description": "" } -
Kontrolní AI zdroj skel ZPŘEDU — nepoužívá se jako výsledný obrysAttached: DA10015612__2.jpg · frame-7347.candidate-frontFace-0-1786610891210730720.elev-frontFace-cut.png
{"endpoint": "https://fal.run/fal-ai/nano-banana-2/edit", "code": 403, "detail": "{\"detail\":\"User is locked. Reason: TOP_UP.\"}"}
elevations.lensFrontFace.raw points at this record's own raw file (elev-lensFrontFace--nano-banana-2-19.png) — the join is on the artefact, not on a model name
- Plocha v rastru
- 77 %
- Průchozích otvorů
- 0
- Souvislých kusů
- 1
- Prolamovaná
- ne
- Odstraněných smítek
- 0
- Pokusů
- 1
- Prošlo kontrolou
- ano
- Počet vrcholů obrysu
- 284× bod
API response
{ "images": [ { "url": "https://v3b.fal.media/files/b/0aa6270a/YIP-cOxS8TcloPxI0Gqf3_nhLFB1Rs.png", "content_type": "image/png", "file_name": "YIP-cOxS8TcloPxI0Gqf3_nhLFB1Rs.png", "file_size": null, "width": null, "height": null } ], "description": "" } -
Měření nosních polštářků
Attached: frames/frame-7347/ref/front-generated.png
rebuilt from the current template for this pass and attempt — the original request was made before prompts were logged, so the wording may differ from what was actually sent
NOT KNOWN and NOT GUESSED — excluded from the frame's total. A typical call of this kind costs well under a cent, but this row is not evidence of that
API response: the model's reply was not kept: this request was made before the pipeline recorded responses, and the HTTP body existed only in memory at the time. The artefact it produced is on disk and is referenced above; the reply text, seed and timings are gone and are NOT reconstructed here
-
Rozpoznání částí
Attached: DA10015612__2.jpg
API response
{ "id": "gen-1786777957-dC3toQTvvV1lLBHSaRYO", "object": "chat.completion", "created": 1786777957, "model": "google/gemini-3.1-flash-lite", "provider": "Google AI Studio", "system_fingerprint": null, "service_tier": "default", "usage": { "prompt_tokens": 1903, "completion_tokens": 341, "total_tokens": 2244, "cost": 0.0009773775, "is_byok": false, "prompt_tokens_details": { "cached_tokens": 0, "cache_write_tokens": 0, "audio_tokens": 0, "video_tokens": 0 }, "cost_details": { "upstream_inference_cost": 0.00098725, "upstream_inference_prompt_cost": 0.00047575, "upstream_inference_completions_cost": 0.0005115 }, "completion_tokens_details": { "reasoning_tokens": 0, "image_tokens": 0, "audio_tokens": 0 } } } -
judge-lens-topology: samotná skla ZPŘEDU
Attached: front-tight.png · elev-lensFrontFace--nano-banana-2-8.judge-1.jpg · elev-lensFrontFace--nano-banana-2-9.judge-2.jpg · elev-lensFrontFace--nano-banana-2-5.judge-3.jpg · elev-lensFrontFace--nano-banana-2-3.judge-4.jpg · elev-lensFrontFace--nano-banana-2-2.judge-5.jpg
- Plocha v rastru
- 77 %
- Průchozích otvorů
- 0
- Souvislých kusů
- 1
- Prolamovaná
- ne
- Odstraněných smítek
- 0
- Pokusů
- 1
- Prošlo kontrolou
- ano
- Počet vrcholů obrysu
- 284× bod
API response
{ "id": "gen-1785630223-NW4GMDHeiYnTVoj4mDID", "object": "chat.completion", "created": 1785630223, "model": "anthropic/claude-opus-5", "provider": "Amazon Bedrock", "system_fingerprint": null, "service_tier": "default", "usage": { "prompt_tokens": 6817, "completion_tokens": 3910, "total_tokens": 10727, "cost": 0.13051665, "is_byok": false, "prompt_tokens_details": { "cached_tokens": 0, "cache_write_tokens": 0, "audio_tokens": 0, "video_tokens": 0 }, "cost_details": { "upstream_inference_cost": 0.131835, "upstream_inference_prompt_cost": 0.034085, "upstream_inference_completions_cost": 0.09775 }, "completion_tokens_details": { "reasoning_tokens": 959, "image_tokens": 0, "audio_tokens": 0 } } } -
response: input
Attached: <inline image/jpeg elided: 26556 bytes of base64 — the artefact is on disk, see artifact.path>
-
vision-openwork
Attached: openwork-crop.jpg
API response
{ "id": "gen-1786777958-w3NAV5vD04aVMCicXXga", "object": "chat.completion", "created": 1786777958, "model": "google/gemini-3.1-flash-lite", "provider": "Google AI Studio", "system_fingerprint": null, "service_tier": "default", "usage": { "prompt_tokens": 1368, "completion_tokens": 27, "total_tokens": 1395, "cost": 0.000378675, "is_byok": false, "prompt_tokens_details": { "cached_tokens": 0, "cache_write_tokens": 0, "audio_tokens": 0, "video_tokens": 0 }, "cost_details": { "upstream_inference_cost": 0.0003825, "upstream_inference_prompt_cost": 0.000342, "upstream_inference_completions_cost": 4.05e-5 }, "completion_tokens_details": { "reasoning_tokens": 0, "image_tokens": 0, "audio_tokens": 0 } } }
How many requests, and what they cost
- AI requests
- 12×
- Time spent on requests
- 220,2 s
- Of which retries
- 1×
- Cost
- $1,08 estimated from the price list, not a receipt
some requests recorded no duration, so this is a lower bound
2 request(s) could not be priced and are not in the total.
reportedUsd is money the APIs said they charged. estimatedUsd is DERIVED from the dated per-model unit prices in tools/price_table.py and is not a receipt. 1 request(s) could not be priced at all and are excluded from the total — see each row's cost.basis.
A further 18 request(s) belong to other builds of this frame and are not counted.
By model
- fal-ai/nano-banana-2/edit
- 6× · 110,9 s · $0,80
- google/gemini-3.1-flash-lite
- 3× · 2,8 s · $0,0014
- fal-ai/nano-banana-pro/edit
- 1× · 46,3 s · $0,15
- anthropic/claude-opus-5
- 1× · 60,2 s · $0,13
- —
- 1×
Build passes, and what each recorded
What the build actually did. “No prompt recorded” means that pass did send an AI request but its wording is not stored yet — not that nothing happened.
- Elevace
- 7 request(s)
- Měření nosních polštářků
- 1 request(s)
- Rozpoznání částí
- 1 request(s)
- judge-lens-topology
- 1 request(s)
- response
- 1 request(s)
- vision-openwork
- 1 request(s)
- List vzorků barev
- no prompt recorded
- Nápis
- no AI, computed here
- Projekce
- no AI, computed here
- Volba klíčovací barvy
- no AI, computed here
Keying background colour
magenta #FF00FF
- Barva
- magenta
- RGB
- 255, 0, 255
- Hex
- #FF00FF
- Odstup od palety rámu (ΔE)
- 1
- Nejmenší přijatelný odstup (ΔE)
- 18
the ground colour asked for when an elevation of THIS frame is requested, chosen as far from the frame's own palette as the candidates allow — magenta unless the frame itself leans that way. Each elevation also records the colour ITS raw was drawn on, which is what re-processing keys; a raw drawn before this was chosen per frame was asked for on magenta.
Zvažované barvy
magenta #FF00FF
green #00FF00
cyan #00FFFF
blue #0000FF
yellow #FFFF00
red #FF0000
Paleta rámu
#000000
#0A0809
#242221
#312F2E
#33312E
#363435
#3E3E3D
#545353
#BB594D
#F2F1EE
#FF0000
#FF6600
Measured geometry
Rám celkem
- Celková šířka
- 166,2 mm
- Celková výška
- 62,5 mm
- Katalogová šířka
- 138 mm
the traced outline's own extent at the solved scale. `totalWidthCatalogMm` is the figure the scale gate compared against: the catalog's single LENS width (`size` first number) — one opening, so the ratio is the front's outboard margin over its own lens, not a width check against a sum of eye and bridge
Obrys frontu
- Obrys (změřené body)
- 66× bod
- Počet vrcholů obrysu
- 66
- perforationCount
- 0
orthographic front elevation, temples removed
traced from the frontFace elevation, which has no temples in it and nothing behind the openings. The outline, both apertures and the albedo all come from this one raster, so a plate vertex and its texel cannot disagree — which is what made the shape wrong and the colour washed when the outline came from a synthesized view and the albedo from a different pass.
enclosed regions of the front elevation that are too small to be lens openings and too large to be keying specks: only holes physically through the frame after its lenses are removed, traced at their own scale. Lens slots are owned by lensFrontFace and are never transferred here. Absolute coordinates, because the pattern need not be symmetric.
Očnice / sklo
- Šířka skla (boxed)
- 137,8 mm
- Výška skla (boxed)
- 55,3 mm
- Odsazení středu očnice
- -178,4 mm / 0 mm
- Obrys očnice
- 58× bod
- Rádius rohu
- 3,8 mm
- Prohnutí skla
- 23,1 mm
- Obrys očnice (v pixelech)
- 58× bod
- Obrys viditelné očnice
- 58× bod
- Viditelná šířka očnice
- 136,2 mm
- Drážka pro sklo
- 0,8 mm
- opening · count
- 1
- opening · kind
- single-shield
- opening · countMeasured
- 1
- opening · countCatalog
- 1
- opening · Souhlasí s katalogem
- ano
- opening · spansCentreline
- ano
- opening · lensWidthCatalogMm
- 138 mm
- opening · perforationsFound
- 0
- curvatureFormulaMm
- 2,9 mm
- curvatureFit · radiusMm
- 114,5 mm
- curvatureFit · atHalfWidthMm
- 68,9 mm
- curvatureFit · rmsMm
- 0,9 mm
- curvatureFit · columns
- 1717
- curvatureFit · profileXMinMm
- -83 mm
- curvatureFit · profileXMaxMm
- 83 mm
- curvatureFit · profileStepMm
- 0,7 mm
- curvatureProfileMm
- 247× bod
- detailElevation · surfacePolygonsMm
- 1× bod
- detailElevation · perforationCount
- 0
- detailElevation · slotCount
- 4
- detailElevation · edgeSlotCount
- 4
- detailElevation · frameOwnedHoleRejectCount
- 0
- detailElevation · ventTopologySource
- nosePad
the LENS outline: the front elevation's own opening grown by the measured 0.80 mm eyewire groove, because the catalog's boxed eye size measures the lens and the photo shows the aperture. ONE continuous opening spanning both eyes — a shield. Absolute coordinates: do NOT mirror this, it already straddles the centreline, and there is one lens and not a pair.
MEASURED construction property, cross-checked against the catalog row. the two agree. Catalog: the catalog `size` is '138-130': two numbers, the first 138 mm being far larger than any boxed eye size (this catalog's largest is in the 60s) and therefore the width of ONE continuous lens, the second 130 mm the temple. A shield is sized the way the manufacturer sizes it: lens width and temple, no bridge, because there is no bridge to measure. Silhouette: enclosed regions of the front elevation's own alpha: 1 at or above 4% of the raster (lens openings), 0 perforations (vent slots, openwork: above 0.04% of the raster and no more than 3% of the opening's own area), and 0 rejected. A single opening is a SHIELD when it straddles the centreline, which is the one thing a pair of eyes can never do
MEASURED: the leading edge of the front, column by column, out of the plan view — the one elevation where the wrap is not foreshortened. The dense millimetre profile is what the builder bends through; the circular radius and sagitta are retained only as a fallback and diagnostic. A column with more than one run keeps the FIRST run (the wrap's leading face); later runs are the arm sitting behind it.
CLASS DEFAULT, CHOSEN BY EYE, NOT MEASURED. A single-lens wrap shield is a circular arc across the face; at a half-angle of 28 deg the sagitta is halfLensWidth * tan(theta/2) = 69.0 * 0.249 = 17.2 mm. The half-angle is judged against the catalog photographs of this frame, which are all the same three-quarter view; nothing here measures it. The two-eye formula (boxedWidth * 0.021) is not applicable — it would give 2.9 mm across a 138 mm lens, i.e. a flat plate. MEASURE IT WITH: a top-down framePlan raster (tools/shape_sheet.py); the wrap is an angle there and an angle needs no cell registration.
elongated transparent regions whose outward material web is thinner than both 0.8 of the slot's minor axis and ~1.15 mm (registration scale); thicker bridges stay enclosed through-holes in the sheet. When another shipped elevation of the same shield sheet scores a clearer rim-parallel vent layout, that witness topology is registered onto the measured seat instead of the dedicated lens elev's elongated holes; compact holes from the lens elev are punched as perforations only when an independent view of the same sheet (the back face) also shows them — otherwise they are keyer artefacts beside the nose, not drills. On a full-rim seat a classified edge vent is translated along its outward normal until it meets the independently measured rim's inner alpha edge; only the catalogue-visible capsule is cut, while any unobserved continuation beneath the opaque rim is not projected into the optical area
Zdroj: frame-7347.elev-lensFrontFace-technical.png?v=1786648869
Zdroj: frame-7347.elev-lensFrontFace-cut.png?v=1786648869
Zdroj: frame-7347.elev-lensBackFace-technical.png?v=1786648869
tools/lens_from_elevation.py
Obruba
- Šířka obruby zpředu
- 3,8 mm
- Nejtenčí místo obruby
- 3,2 mm
- Hloubka obruby
- 2,3 mm
- Drážka pro sklo
- 0,8 mm
- Krytí
- úplné
- Konstrukce
- z plátu acetátu
- Jak se měřila šíře obruby · Šířka obruby zpředu
- 3,8 mm
- Jak se měřila šíře obruby · Nejtenčí místo obruby
- 3,2 mm
- Jak se měřila šíře obruby · Nejsilnější místo obruby
- 4,2 mm
- Jak se měřila šíře obruby · Šíře nad očnicí
- 4 mm
- Jak se měřila šíře obruby · Šíře pod očnicí
- 3,5 mm
- Jak se měřila šíře obruby · Rozptyl nad očnicí
- 3,7 mm / 5,7 mm
- Jak se měřila šíře obruby · Rozptyl pod očnicí
- 3,1 mm / 3,9 mm
- Jak se měřila šíře obruby · Měřeno od
- viditelná očnice
- Jak se měřila šíře obruby · Vzorků
- 29
- Jak se měřila šíře obruby · Krytí
- úplné
- Jak se měřila hloubka · Hloubka obruby
- 2,3 mm
distance from the opening's boundary to the outer contour along the opening's own outward normal, over the brow and the bottom rail — the sectors whose neighbour is rim rather than bridge or endpiece, and only where the outer contour still runs within 12 deg of parallel to the opening, which is what a rim does and what a bridge or an endpiece junction does not. Derived from the polygons the plate is cut from, so it cannot disagree with the rendered rim.
this frame's profile view did not resolve the plate edge-on consistently enough to measure, so the depth is the median of the 5 plate depths this pipeline HAS measured — a measurement carried over, not the rim's face width, which is a different dimension and is what used to be copied in here
Nosník
- Rozteč nosníku
- 0 mm
- Výška můstku
- 0 mm
- Horní hrana můstku
- 0 mm
- Hloubka můstku
- 3 mm
- Výška klenby
- 0 mm
- kind
- žádné
ONE continuous lens opening: there is no bridge on this front. The nose is a notch in the lower rail, already part of `frontOuter`, not a bar between two rims. Zero is a measurement here, not a missing value.
Stranička
- Délka straničky
- 130 mm
- Délka ramene
- 80,6 mm
- Výška u pantu
- 11,1 mm
- Výška u konce
- 3,9 mm
- Tloušťka ramene
- 3,6 mm
- Rozevření
- 4°
- Materiál ramene
- jako stranička
- Koncovka straničky · Délka koncovky
- 49,4 mm
- Koncovka straničky · Výška
- 3,9 mm
- Koncovka straničky · Tloušťka
- 3,4 mm
- Koncovka straničky · Výška na konci
- 3,4 mm
- Koncovka straničky · Zúžení na začátku
- 96 %
- Koncovka straničky · Pokles koncovky
- 16,3 mm
- Koncovka straničky · Začátek poklesu
- 40 %
- Koncovka straničky · Vidět kovové jádro
- ne
- Koncovka straničky · Průměr jádra
- 0 mm
- plan · view
- planWhole
- plan · source
- traced-symmetric
- plan · trace
- raster-row-runs-from-arm-start
- plan · Vzorků
- 149
- plan · Měřítko
- 0,0811 mm/px
- plan · mmPerPxArc
- 0,08
- plan · rasterMmPerPx
- 0,0968 mm/px
- plan · rasterScaleSource
- raster-ink-span
- plan · scaleSource
- arm-arc-length
- plan · scaleVsArc
- 1
- plan · lengthTracedMm
- 130 mm
- plan · stepMm
- 0,9 mm
- plan · edgeAMm
- 149× bod
- plan · edgeBMm
- 149× bod
- plan · outlineByDepth
- 315× bod
- plan · depthLengthMm
- 125,5 mm
- plan · outlineRootDepthMm
- 17,7 mm
- plan · outlineDepthMmPerPx
- 0,0808 mm/px
- plan · outlineWidthMmPerPx
- 0,0968 mm/px
- plan · outlineStepMm
- 0,4 mm
- plan · outlineTrace
- raster-row-runs-from-arm-start-symmetric
- plan · widthAtHingeMm
- 8,2 mm
- plan · widthMedianMm
- 9,9 mm
- plan · bowMm
- 20,2 mm
- plan · outwardAtTipMm
- -4,9 mm
- plan · perSideDisagreementMm
- 0,2 mm
- planPerSideMeta · view
- planWhole
- planPerSideMeta · splayDegMeasured
- 14,83
- planPerSideMeta · splayPerSideDeg
- 14,8° / 14,9°
- depthMeasurement · variant
- 7347
- depthMeasurement · slot
- templeOuter
- depthMeasurement · hingeMm
- 11,1 mm
- depthMeasurement · tipMm
- 3,9 mm
- depthMeasurement · peakMm
- 11,1 mm
- depthMeasurement · anchor
- front elevation (lug terminal face)
- depthMeasurement · sideHingeMm
- 16,4 mm
- depthMeasurement · frontHingeMm
- 11,1 mm
- depthMeasurement · sideOverFront
- 1,48
- depthMeasurement · rawHingeMm
- 12,7 mm
- depthMeasurement · rawTipMm
- 5,8 mm
- depthMeasurement · band
- 0,8 / 20
- depthMeasurement · currentHingeMm
- 11,3 mm
- depthMeasurement · currentTipMm
- 4,5 mm
- depthMeasurement · accepted
- ano
the MEAN of the two arms walked out of the one plan view, each expressed HINGE-RELATIVE and signed so that positive is OUTWARD — which side is outward comes from which side of the raster's midline the arm sits on, so a pair whose arms CONVERGE measures as converging. A pair of temples is symmetric by construction, so what the two walks differ by is the drawing's noise rather than the product's shape; `perSideDisagreementMm` is how much that was. Both arms build from this one curve and the builder's mirror makes the pair symmetric.
Zdroj: frame-7347.elev-planWhole-cut.png?v=1786648869
the plan is drawn looking DOWN with the openings facing away from the viewer, which is map orientation: a wearer facing the top of the image has their right towards the image's right. So the arm whose centroid sits right of the midline is the WEARER'S RIGHT. Read off the raster, never assumed, and never one arm mirrored for the other.
MEASURED from the whole-frame plan view: each arm cut out of the one raster, turned hinge-left, and walked at 240 stations by the same tracer the per-arm plan views use, so the two contracts are identical. SCALED BY arm-arc-length (0.08112 mm/px). A plan of the whole frame is scaled by the FRONT's own width when the raster carries a front, because that is the dimension the drawing gets right, shares a direction with everything measured here, and is not foreshortened the way a descending temple's length is; the arm's arc length against the catalogue temple length is the fallback, and is all there is on an arms-only or clipped-front draw. The two rulers differ by a factor of 1.0 on this raster — that figure is how far out of proportion the drawing is, front against arms, not measurement noise.
tools/temple_depth.py: the arm's depth read off its own side elevation (templeOuter), corrected for the centreline's slope, scaled by the catalogue temple length. Replaced the family default 11.34 -> 4.52 mm.
Nosní polštářky not on this frame
the front is a front 14.36 mm wide; a plate that thick carries the pad form in its own material, with no arm and no insert. The catalog's temple column says "silné acetátové straničky s oranžovými d", which agrees.
no pad-sized mirrored pair stands between and below the apertures: pads moulded into the front rather than separate ones
no pad FORM could be measured in the front photograph. On a plate front that does not mean the frame has no pads — almost every plastic frame moulds them in — only that this photograph does not resolve them, so the front's own bridge geometry is all there is to build from
a pad is a pad-sized BODY, mirrored about the bridge centre line, below the bridge bar and within a pad arm's reach of it, either a different material from this frame's own measured palette or standing inside the opening where the rim does not reach. Nothing here tests for pale.
Zdroj: front-tight.png
MEASURED off planWhole: ink behind the front bar on the centreline — the pad assembly as seen from above, which the front photograph often does not resolve. polygonMm is that island's own silhouette, not a box.
The island is the nose rest as seen from above — one saddle behind the lenses, toward the wearer's nose, not a brick in the rim openings. Extrude polygonMm along Y at the lower-nasal of the apertures; Z is the polygon's own depth behind the leading face. A plate front whose front photograph missed the pads still builds this part.
Prohnutí a sklon
- Prohnutí frontu
- 6°
- Pantoskopický sklon
- 8°
Měřítko fotky
- Měřítko
- 0,0527 mm/px
- Očnice v pixelech
- 2590 px
- lensWidthCatalogMm
- 138 mm
- Drážka pro sklo
- 0,8 mm
- Šířka po přepočtu (kontrola)
- 166,4 mm
- Katalogová šířka
- 166,2 mm
- scaleGateReferenceMm
- 138 mm
- totalWidthRatio
- 121 %
- photoAgreement · applicable
- ne
- photoAgreement · agrees
- ano
- photoAgreementVerdict · action
- accept
ONE lens opening: the catalog `size` gives the single lens width 138 mm and no bridge, so the scale is solved from that against the elevation's own aperture width, and the groove is the median 0.80 mm of the 15 grooves solved on frames whose row carries both an eye and a bridge. A shield has no bridge to solve against — that is what makes it a shield
the catalog's single LENS width (`size` first number) — one opening, so the ratio is the front's outboard margin over its own lens, not a width check against a sum of eye and bridge
no usable pair of lens openings in one of the two rasters, so the photograph cannot referee the drawing
Zdroj: front-tight.png
no usable pair of lens openings in one of the two rasters, so the photograph cannot referee the drawing
endpiece
- kind
- lug
- cutMm
- 72,7 mm
- outlineMm
- per side, see lug.sides.*.outlineMm
- sectionProfile
- per side, see lug.sides.*.sectionProfile
- joinXMm
- 83,1 mm
- joinYMm
- 12,8 mm
- joinYAsCentreFrac
- 30 %
- joinSectionMm · Výška
- 11,1 mm
- joinSectionMm · widthMm
- 3,6 mm
- joinZMm
- -35,8 mm
- outgoingTangent · dy
- 0
- outgoingTangent · dz
- -1
- outgoingTangent · Rozevření
- 4°
the front's own terminal face is 11.08 mm against the arm's 11.34 mm at the joint (98%), over 10.38 mm outboard of the rim band, with a tongue 8.34 mm long on a plate front: the corner carries the arm's own section and holds it, so the two are one form
aperture half-width 68.94 + rim.frontWidthMm 3.767 — the outer edge of the constant-width rim, which is also the x the builder currently starts the arm on (`hingeX`)
TRACED, not parameterised: the front's own material outboard of the rim band, in the orthographic front elevation, walked by trace_front.outer_contour, smoothed for the raster staircase and simplified by trace_front.rdp through front_from_elevation.contour_mm — the same tracer the front outline, the temple and the nose pad use, in this raster's own millimetres so a lug vertex and a plate vertex cannot disagree. MEASURED in x and y; blind to z.
MEASURED: the outermost x the front's own traced silhouette reaches, in the elevation that silhouette came from. The builder currently starts the arm at 72.71 mm (aperture half-width + rim face width), which is 10.38 mm INBOARD of the front's own end — 20.75 mm across the pair.
MEASURED: the vertical centre of the lug's own terminal face, fitted over the whole tongue and read at the station where the tip fillet starts, on BOTH sides (they agree to 0.00 mm), in the orthographic front elevation where the corner is seen face-on and y is exact. The builder currently uses 16.29 mm, from the mean of the side elevations' `hinge.centreFrac` (none (catalog default 0.24)) — which sits -3.45 mm LOWER, on an arm whose own section is only 11.08 mm, so the arm leaves through the bottom of the lug with its lower half in air. The two side views agree with EACH OTHER to 0.00 mm, so this is not their scatter: a side elevation collapses the front, the hinge and the arm's root into one line of sight and its fraction is of the front's whole 62.5 mm height. As a centreFrac the measured value is 0.2952.
HEIGHT MEASURED FOUR WAYS and they converge: the lug's terminal face 11.08 mm (front elevation), the arm's first traced section None mm (side view), `elevations.templeOuter.measured.heightAtHingeMm` 16.52 mm, and the joint seam in the real three-quarter photograph None mm. WIDTH IS A CLASS DEFAULT: it is `temple.bladeThicknessMm`, itself derived as 0.48x the arm's height because no view in this set sees across the arm. Not a measurement.
CLASS DEFAULT, and the reason is geometric rather than a shortage of effort: at the temporal corner the image directions of the front's +x and of the arm's own departure (which is -z to within the splay) are only None deg apart, so a seam a millimetre further out and one several millimetres further back are the same photograph. The synthesized side elevation cannot stand in either — it draws the front's slice ? mm deep against a plate measured at 2.30 mm, so its z is not metric. This is therefore the plate's own back face at the join (wrap -33.52 minus rim.depthMm 2.30) and NOT the rear of a boss. The view that would measure it is a TOP-DOWN PLAN elevation, where the corner's rearward run is unforeshortened and the seam is in plain sight. The builder currently uses -23.75 mm, which is inside the plate.
dy MEASURED: the arm's own centreline descends None of its length over its first traced section, and the side elevation's arm/front split boundary gives None for the same slope — so the arm leaves the lug already falling, it does not leave level. dz is -1 by construction (the arm runs rearward) and dx is NOT separable from dz in a three-quarter view, so the splay stays `temple.splayDeg` 4.0, a CLASS DEFAULT. In the image the arm leaves along (1, None) with a None px fit — that is a real measurement of the projection, and it is not enough to split x from z.
Materials and colours
Front (rám)
#0A0809 lakovaný plast
also Slot palety: rose gold
lining
#33312E lakovaný plast
Stranička
#363435 lakovaný plast
also Slot palety: žíhaný acetát
Čočka (čirá)
#FF0000 sklo / čočka
Nosní polštářek (silikon)
#F2F1EE průsvitný plast
not on this frame
clip
#312F2E lakovaný plast
Front (rám): median colour of the traced rim zone in the catalog front photo
Front (rám): READ, not measured: the real catalogue photograph, by google/gemini-3.1-flash-lite (tools/vision_parts.py). Nothing in this pipeline measures translucency — the front elevation is keyed onto transparency, so a milky acetate and a solid one are the same silhouette — and the builder cannot make a translucent front without a number here. 0 means opaque and is the answer when the model is unsure, because a front built translucent that is not looks far worse than one built solid that should not be.
lining: MEASURED: inner band 0.25-0.95 mm inside the rim vs the front face 1.8-3.6 mm out differ by 68.8 in RGB, so this front really is two-tone
Stranička: rim/frame body — catalog secondaryColorHex is an accent (tip/logo), not the temple body; front temple zone had too few pixels to sample
Čočka (čirá): product_variants.lens_type = 'zrcadlová barevná' (catalog column, carried through bestsellers.json)
Čočka (čirá): product_variants.lens_color_hex = #FF0000 (červená) — the CATALOG's own recorded lens colour, read from the column, not sampled from this render and not measured here; it drives both the surface tint and the attenuation colour
Čočka (čirá): CLASS DEFAULT, NOT MEASURED. The catalog carries no lens material: there is no CR-39/polycarbonate/index column on product_variants or anywhere else in the schema, because the product is the FRAME and the lens material is chosen by the optician per prescription. What ships in the frame is a plano demo lens, and a plano demo lens is hard resin — CR-39 (allyl diglycol carbonate), n_d 1.498, Abbe V_d 58, both datasheet constants for that material class. Replace this with a real value the moment either exists: a catalogued lens material (a new column, which today's schema does not have), or a measured one. Until then no reader should treat ior/abbeNumber here as a fact about THIS frame.
Čočka (čirá): class default for a coloured mirror sun lens (category 3): the catalog colour is the COATING's colour seen from outside
Čočka (čirá): class default: a plano demo lens runs about 2 mm at centre; the catalog carries no lens thickness
Nosní polštářek (silikon): default matt silicone; no reading available
clip: CLASS DEFAULT, not measured by this pass — a moulded acetate clip, same value the temple's material carries. This tool measures COLOUR.
clip: CLASS DEFAULT 0: nothing measures a clip's translucency and an opaque clip that should be milky looks better than the reverse.
clip: MEASURED off the catalogue photograph: the median colour of the material band hugging the TINTED LENSES, which is the clip's own rim. The clip is found by its lenses and not by segmentation, because on four of the five clip sets on disk the clip OVERLAPS the frame and the two are one connected component — while in every one of them the clip's lenses are tinted and the frame's are clear, which is what the product is for. A lit median, not de-lit, for consistency with materials.frame.baseColor, which is measured the same way. measured at recolor_temple.frame_mask's 900 px working resolution, which is a WHERE-things-are resolution; a median colour needs no more, and this is the same raster the frame's own zone colours are measured on. The BAND WIDTH is a stated rule and not a measurement: 0.12 of the lens blob's own mean radius, so it scales with the frame. `palette` is what the band actually holds — a clip may be genuinely two-tone (MW 29094/512 is mint outside and pink inside) and the single median would report their average as if it were the colour.
How it was measured
- the front elevation itself as the albedo, in the SAME raster the outline and the apertures were traced from, so the plate's UVs land where they were measured. Openings are declared background before the bleed, so no texel inside an opening can leak onto the rim.
- the temple cut out of the real photo with the product mask as ALPHA, so the openings in an openwork temple are real transparency: u runs hinge to tip, v across the height. Carries the silhouette, the taper, the tip's shape, the contrasting colours and any printed mark, none of it described in code
- one orthographic elevation per face, one API request each — no grid to re-derive. cropBox is the tight box of the keyed silhouette, stored so a later pass reads the same crop the measurements were taken on. Millimetres come from the catalog temple length over the box width, which is exact because an elevation is unforeshortened.
- frames/frame-7347/ref/front-generated.png
- a front SUPPLIED on the command line — no photograph of this frame is a usable front (every catalog shot is three-quarter, or the frame is a shield with one lens), so the shape is second-generation
- eye only (catalog row has no bridge); groove assumed 0.8 mm per side
In stock Gafas
DA 10015 SUN
Series code: DAKAR SUN 10015 COL 643
Replacement for: DA 10015/613, DA 10015/612, DA 10015/545, DA 10015/515, DA 10015/514
Dakar DA10015 Sunglasses in Matte Black and Orange
Looking for style and dynamics? These rectangular Dakar sunglasses in a matte black finish will grab your attention immediately. The bold full-rim frame is complemented by colorful mirrored lenses that highlight a modern look. The highlight is the thick acetate temples with contrasting orange details and the brand logo. They are the perfect choice for anyone seeking a blend of functional design and striking color accents.
About Dakar:
The adventure of this brand began in 1977, when Thierry Sabine got lost on his motorcycle in the Libyan desert during the rally from Abidjan to Nice. Following this extreme experience, he returned to France fascinated by the desert landscape and decided to share his "discovery" with others. And so, the route ending in Dakar was born. The founder of this venture coined the motto: "A challenge for those who go, a dream for those who stay."
For everyone who grabs life with both hands. For those seeking a real challenge and intense, extreme sensations. For all the determined, passionate individuals who love the beauty of nature... For those driven by the desire to feel more alive than ever before, and for those who want to be the heroes of their own story.
It is in this spirit that Dakar sports frames and sunglasses are created.
The sunglasses are designed to be lightweight, and a special material prevents them from sinking.
For everyone who grabs life with both hands. For those seeking a real challenge and intense, extreme sensations. For all the determined, passionate individuals who love the beauty of nature... For those driven by the desire to feel more alive than ever before, and for those who want to be the heroes of their own story.
It is in this spirit that Dakar sports frames and sunglasses are created.
The sunglasses are designed to be lightweight, and a special material prevents them from sinking.
Specifications
- Category
- Sunglasses
- Material
- TR90
- Size
- 138-130
- Frame colour
- černá
- Colour family
- Black
- Shape
- Rectangular
- Rim type
- Full rim
- Finish
- Matte
- Pattern
- Solid
- Temples
- silné acetátové straničky s oranžovými detaily
- Lens colour
- červená
- Lens type
- Mirrored colour
- EAN
- 8423057853924
